The whole world of Panel Processing machines
The whole world of Panel Processing machines
Model J-4300.in without radius trim function also available
Feeding Belt : Made of special material which guarantees long lasting sturdiness & stability. Synchronous teeth of belt & pinion gives high traction & vibration free movement with optimal panel holding
Gluing, Banding & Edge Cutting : Edges in rolls are loaded automatically and cut precisely to size with a cutter
End Cutting : Pneumatically operated End cutting unit has solid cutter to guarantee a clean, precision cut on the front and rear edges of the panel
Edge Fine Trimming :
A) Compact and powerful high frequency motors guarantees best finish on top and bottom edges.
B) Unit has copiers which are bearing mounted to ensure smooth panel feed.
C) Very easy precision adjustment of trimming cutters by position indicators.
Buffing : Unit ensure surfaces to give a perfect polishing effect of the edges
Control Panel : Easy accessible user friendly control panel positioned at in-feed, for easy and quick operation
Radius Trim : For Chamfering of the Panel Corner, manually (Radius function Applicable For Model J-4300R.in Only)
| Model No | Unit |
J-4300.in |
J-4300R.in |
| Work piece thickness range | mm |
10 - 45 |
10 - 45 |
| Minimum work piece width | mm |
100 |
100 |
| Minimum work piece length | mm |
180 |
180 |
| Edge Banding Thickness for PVC & ABS in coil form | mm |
0.4 - 3.0 |
0.4 - 3.0 |
| Workpiece Feed | m/min |
6 |
6 |
| Fine Trimming motor power | no / hp |
2 x 0.5 |
2 x 0.5 |
| Buffing motor power | no / hp |
2 x 0.5 |
2 x 0.5 |
| Radius trimming power | hp |
n / a |
0.4 |
| Air pressure required | kg/cm2 |
6 to 7 |
6 to 7 |
| Working temperature range | °C |
180 - 200 |
180 - 200 |
| Glue pot capacity | kg |
1 |
1 |
| Total power | hp |
4 |
4.4 |
