The whole world of Panel Processing machines
Model with Pre-Milling and Round cornering J-5200PRc.in also available
Pre -Milling (For J-5200PRc.in) :
A) An optimal unit for panel edge pre-milling with two high frequency compact motors
B) Individual pneumatic cylinder prepares perfect panel for gluing
C) Smooths the panel for achieving perfect joint line of the edge
The Feed Track : Robust feed chain & conveyor system with German gearbox gives straight movement & effective pressure on small / big panels
Gluing, Banding & Edge Cutting :
A) Innovative pre-melting sensor operated Teflon Coated glue tank having glue drop system to automatically maintain require glue level in tank, so glue spreading roller provides precise & consistent glue application without glue overheating to avoid wastage of glue, which result into less than 50% consumption of glue, compare to other Edge banders
B) Perfect adhesion to the applied edge with 3 pressure rollers actuated by pneumatic cylinders
C) Heavy duty knife with pneumatic pressure cuts the PVC/ABS edge banding materials up to 50mm height & 3mm thickness
End Cutting, Fine Trimming & Round Cornering :
A) Compact and powerful high frequency two independent motors guarantees best finish on edge, sliding on two heavy prismatic guideways with recirculation ball bearings
B) High level finishing thanks to the sturdy structure that is free of any vibration.
C) Trimmer 2R cutter for PVC/ABS gives perfect rounding on edge of straight, chamfered and regular post formed panel
Edge Scraping & Cleaning Agent :
A) Gives the best finishing touch to the PVC/ABS edges , leaving no trimming marks on the panel
B) Unit complete with rotating copiers
C) Scraping unit with an extraction hood complete with a suitable container and filter for long chips.
D) In order to prevent glue to adhere on panel, this liquid is sprayed to lower & upper edge surface of the panel
Buffing : Independently adjustable buffing wheels, for cleaning & polishing of the panel edges. It can be adjustable at a particular angle to maximize it's effect for better finishing of work piec and increase the life of buffing wheels.
Control Panel : Easy accessible user friendly Smart Touch PLC control panel positioned at machine in-feed, for easy & quick operations
PUR Glue Tank (Optional)
Applicable for Models J-5200, J-5300 & J-5700.
High water and heat resistance.
Good adhesion on different edge composition.
High resistance of solvent.
No Glue line.
Easy change over of EVA Glue tank.
Low working temperature : 110°C to 155°C.
Glue pot capacity : 2 kg.
Machining Examples with the Round cornering Group
Model No | Unit |
J-5200 Rc.in |
J-5200 PRc.in |
Work piece thickness range | mm |
10 - 50 |
10 - 50 |
Minimum work piece width | mm |
120 |
120 |
Minimum work piece length | mm |
150 |
150 |
Edge Banding Thickness for PVC & ABS in coil form | mm |
0.4 - 3.0 |
0.4 - 3.0 |
Workpiece Feed | m/min |
12 |
12 |
Pre-milling motor power | no / hp |
n / a |
2 x 2.0 |
End cutting, Fine Trimming & Round Cornerning motor power | no / hp |
2 x 1.0 |
2 x 1.0 |
Buffing motor power | no / hp |
2 x 0.5 |
2 x 0.5 |
Air pressure required | kg/cm2 |
6 to 7 |
6 to 7 |
Working temperature range | °C |
180 - 200 |
180 - 200 |
Glue pot capacity | kg |
1.5 |
1.5 |
Total power | hp |
7.63 |
11.63 |